Support

Home \| Advice \|Products & Services \| Free Estimate \| Support \| Company \| Referral

	Support

Security System Maintenance
With normal use, the system requires minimum maintenance. The following points should be observed.

1. Do not wash the security station with a wet cloth. Light dusting with a slightly moistened cloth should remove normal accumulations of dust.

2. The battery/bell test is designed to determine battery condition. We recommended, however, that the standby batteries be replaced every three years.

3. For other system devices such as smoke detectors, passive infrared, ultrasonic or microwave motion detectors or glassbreak detectors, consult the respective manufacturer's literature for testing and maintenance.

Alarm Trouble
The control panel of your Titan Security System continuously monitors a number of possible trouble conditions. If one of these trouble conditions occur, the keypad will beep twice every 10 seconds until you press any key on the keypad.

Note: A TROUBLE condition reduces the security your system is designed to provide. Call Titan for service as soon as possible.

An alarm trouble will be indicated by the trouble light which will remain ON until the trouble condition is cleared. If you cannot determine the cause of the trouble condition, contact your installer for assistance.

To view the type of trouble condition, press *2 on your keypad. One or more zone lights will turn ON, indicating the various trouble conditions.

Zone Light	Type of Trouble
1	Service required. Call your installation company for service.
2	Indicates the loss of AC power. When this trouble occurs, the trouble (or system) light will turn ON but keypad buzzer will not sound.
3	Telephone line trouble.
4	The panel has failed to communicate with the central station.
5	Zone fault. Press (5) and the zone light(s) corresponding to the faulted zones will turn ON.
6	Zone tamper. Press (6) and the zone light(s) corresponding to the tampered zones will turn ON.
7	Low zone battery. This trouble is generated when a wireless device exhibits a low battery condition.
8	Loss of time on system clock.

Click here for online manual for the DSC-1555 (Power 632).

Click here for online manual for the DSC-5015 (Power 832)

For more information about Titan Security Solutions, call us now at
(979) 774-7233 in Bryan or Contact Us Online!

Site Maintained by Capprio.com